A fiberglass shower pan does not require grout unless it will be tiled. Tiling over a fiberglass pan is not suggested, however if you have actually currently done so, you need to grout it too to seal the areas in between the tiles. Here’s how.

Action 1 – Determine Whether the Pan Can Be Grouted

Utilize a non-flexible pan. Since the tiles will split after a brief duration of time, versatile pans can not be tiled and grouted. Do some research study to find out which brand names of fiberglass pans can endure tiling. User evaluations are a fantastic resource.

Action 2 – Preparations

Pick a tile style that matches the walls of the shower. Do not set big tiles for the flooring. Pick smaller sized tiles, as they are simple to slope. When putting the tile mortar over the pan, slope it towards the drain to prevent flooding.

Step 3 – Tiling

If you have not tiled the pan, now is the time. Start tiling from the middle of the flooring towards the walls. Apply thinset mortar equally to guarantee that the tiles are level with the slope. Look for bulges and disproportion in the setup. As soon as the tiles remain in location, enable the mortar to dry.

Step 4 – Get Ready For Grouting

Due to the fact that the areas in between the tiles are smaller sized than other tile setups, it is best to utilize non-sanded grout. Search for grout items that are created particularly to hold up against the wetness in the shower. Enable the mortar to dry completely till it solidifies completely and sets the tiles in location. Eliminate any excess mortar in between the tiles.

Mix the grout in a container and gradually include water. Stir the blend with a trowel. Never ever put the contents of the grout into the container. Include more water to make the mix damp. Include more grout up until it reaches the correct consistency if mix is too damp.

Step 5 – Grouting

Utilize the rubber float to squeeze the grout in between the tiles at a 45-degree angle. If the tile surface areas end up being hazy with each application of grout, do not fret. That can be handled later utilizing a wet sponge.

When the joints are grouted, enable them to treat according to the maker’s guidelines. Clean the additional grout from the tile with a moist sponge. Re-grout them if there are any improperly grouted locations. Tidy the excess grout and let it treat entirely for as much as 72 hours.

Action 6 – Sealing the Grout

Seal the grout with a water resistant sealant to guarantee optimal wetness defense. Permit the sealant to dry entirely prior to utilizing the shower.